Users Guide ValueJet 1614
101
AP-75790 Rev 1.4 -22/02/2011,
5.1.5 Head cleaning
When to perform?
Perform a head clean if the prints become blurred or are incomplete.
Notes
Remove media while cleaning.
Step 1 :
Verify that the operation panel is in Normal mode.
Step 2 :
Verify that the media hold lever is lowered
Step 3 :
Press the [>] key on the operation panel to select the cleaning mode.
Step 4 :
Press the [Cleaning] key on the operation panel for at least 2 seconds.
Result: The operation panel displays Cleaning **%.
Step 5 :
Start the head cleaning.
Notes
Pressing the [Cleaning] key again after the 1st head cleaning performs a strong cleaning. If you fail to
remove blurs or incompleteness of printing in one head cleaning, perform a strong cleaning.
If you fail to remove blurs or incompleteness of printing with several head cleaning, refer to
Troubleshooting
, and perform the adequate process.
Be sure to read and understand the safety warnings before handling the printer.
All manuals and user guides at all-guides.com
all-guides.com
