Users Guide ValueJet 1614
54
AP-75790 Rev 1.4 -22/02/2011,
4.3.5 Step adjustment
After every printed swath, the media is fed a certain distance. Depending on the kind of media (weight,
backing) another media feed compensation has to be set. This to avoid the following phenomenon:
Printed swaths overlap.
White lines between every swath.
In such cases, follow the procedure below and adjust the media feed compensation value.
Step 1 :
Display the Media feed compensation menu on the operation panel.
Step 2 :
Press the [Menu] key on the operation panel.
Shift to the Setup menu display.
The operation panel displays "Menu 1: Setup>".
Step 3 :
Press the [>] key on the operation panel.
The operation panel displays "Set1: MediaType".
Step 4 :
Press the [Enter] key on the operation panel.
The operation panel displays "Media: Type 1".
Step 5 :
Press the [+] key or [] key to sele
ct the media type you wish to use.
Step 6 :
Press the [Enter] key on the operation panel.
The operation panel displays "**>1: Print Mode".
Notes
The selected media (Type 1-30) is displayed in "**". Please refer to
Media Type menu
Press the [+] key or [] key to
select "**>2: PF Adjust>".
Press the [>] key on the operation panel.
±
The operation panel displays "PF1: Initial Print".
All manuals and user guides at all-guides.com
