MUTOH valuejet 1614 Page 30 User Manual Download

Page: 30 / 125

Users Guide ValueJet 1614

AP-75790 Rev 1.4 -22/02/2011,

3.2 SWITCHING THE POWER ON / OFF

3.2.1 Switching the power ON

Step 1 :

Press the [Power] key on the operation panel to switch ON the printer.

The Power indication light on the operation panel lights green.

The printer starts initializing.
When the initialization is completed, the printer enters the normal status.

Notes

If there is a problem during initial operation, the printer displays a message on the operation panel and
may stop operating.

In the case the operation stops, refer to "Troubleshooting.

Be sure to read and understand the safety warnings before handling the printer.

All manuals and user guides at all-guides.com

Summary of Contents for valuejet 1614






























































































































Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands

MUTOH valuejet 1614, User Manual

Search results

Summary of Contents for valuejet 1614

Reviews:

Related manuals for valuejet 1614

Brands by name

Popular brands