your machine has a control panel, you can also change IP address using the machine's control
panel.
In an office environment, we recommend that you contact a network administrator to set this
address for you.
IP setting using control panel
1. Connect your machine to the network with an network cable.
2. Turned on the machine.
3. Press
Menu
on the control panel.
4. Press the up/down arrow to highlight
Network
and press
OK
.
5. Press the up/down arrow to highlight
TCP/IP
and press
OK
.
6. Press the up/down arrow to highlight
Static
and press
OK
.
7. Press the up/down arrow to highlight
IP Address
and press
OK
.
8. Enter the IP address using numeric keypad and press
OK
.
9. Enter other parameters, such as the
Subnet Mask
and
Gateway
and press
OK
.
10. After entering all parameters, press
Stop/Clear
to return to ready mode.
Now go to "Installing wired network connected machine’s driver" on page 3.
IP setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your machine using its MAC
address to communicate with the machine. A MAC address is the hardware serial number of the
network interface and can be found in the
Network Configuration Report
.
For using SetIP program, disable the computer firewall before continuing by performing the
following:
1. Open
Control Panel
.
2. Double click
Security Center
.
3. Click
Windows Firewall
.
4. Disable the firewall.
Installing the program
1. Insert the Printer Software CD-ROM provided with your machine. When the driver CD runs
automatically, close that window.
2. Start a web browser such as Internet Explorer and open the X drive. (X represents your CD-
ROM drive.)
3. Double-click
Application
> SetIP.
4. Double-click
Setup.exe
to install this program.
5. Click
OK
. If necessary, select a language from the drop-down list.
6. Follow the instructions in the window and complete the installation.
Starting the program
1. Connect your machine and the computer using network cable.
2. Turned on the machine.
3. From the Windows
Start
menu, select
All Programs
> Samsung Network Printer Utilities >
SetIP > SetIP.
4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration
window.
5. Enter the machine’s new information into the configuration window as follows:
Page 3 of 24
Network setup
8/4/2009
http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/...
38