Muratec Dynamo MFX-2530, Operating Instructions Manual

Page: 21 / 203

1.5
Getting started
13
One-touch keys — The keys labeled 01-78 offer one-touch dialing conve-
nience. You also can use the keys labeled 79-84 for programmable functions:
this allows you to teach your machine an advanced multi-step function just
once, then recall the function at any time by pressing one of these keys.
14
Soft Keys — Shortcut keys. Any function that can be turned on or off can be
programmed into these four keys. If the light above one of these keys glows,
this indicates the setting that’s been programmed into it (see page 4.1) is
turned on. These keys are programmed at the factory to turn the following
functions on or off:
Soft Key 1:
STAMP
— Press this key to set the machine to stamp each original
document or page automatically when the machine transmits it successfully.
Soft Key 2:
REPORT
— Press to turn the confirmation report feature on or off
for the next fax transmission.
Soft Key 3:
MONITOR
/
CALL
— Press to turn the monitor speaker on or off. When
it’s on, it allows you to hear the call you’re making. When using this feature,
you can only hear the communication taking place. You cannot be heard
unless you use a handset (optional). When sending a fax, this key also acti-
vates the call request feature.
Soft Key 4:
MEMORY TRANSMIT
— Select which transmission mode your
machine uses, whether from memory or from the document feeder.
15
START
— Press to begin a fax communication or copying.
16
STOP
— An all-purpose “Whoa!” key. Stops the current operation and ejects a
document from the document feeder.
17
RESET
— Press to cancel the settings.
18
Cursor key — Use in various scenes, to select an item on
LCD
or the enter
the numbers when you are setting up the machine.
19
ENERGY SAVING
— Press to enter the Sleep mode. If you press it for 3 seconds,
it will be in the Auto power off mode. Press this key again to return to
standby mode. (See page 1.8 for details.)
20
NEXT
— When the frame of the item at the lower part on
LCD
is shown with
double or more lines, it means that you can select more items. Press this key
to show the more items.
21
Select function keys — These keys correspond to the items at the lower
part on the
LCD
. Press to choose item at the lower part on
LCD
.
22
FAX
— Press to change from Copy mode to Fax mode.
23
COPY
— Press to change from Fax mode to Copy mode.
Getting Started
All manuals and user guides at all-guides.com
all-guides.com