Muratec Dynamo MFX-2530 Operating Instructions Manual Download Page 168

Page: 168 / 203

The Bypass tray

Open the printer cover by holding the
printer cover release (R

Important: Never touch the electrical contacts inside the printer cover or

under the drum cartridge, as an electrostatic discharge may
damage the machine.

Remove the jammed paper.

Close the printer cover.

The optional duplex unit

Open the duplex unit cover.

Remove the jammed paper.

Open the printer cover by holding the
printer cover release (R

). Remove the

jammed paper

Close the duplex unit cover and the
printer cover.

Electrical Contacts

Just in case

5.4

All manuals and user guides at all-guides.com

Summary of Contents for Dynamo MFX-2530












































































































































































































Search results

Summary of Contents for Dynamo MFX-2530

Reviews:

Related manuals for Dynamo MFX-2530

Brands by name

Popular brands

Muratec Dynamo MFX-2530, Operating Instructions Manual

Search results

Summary of Contents for Dynamo MFX-2530

Reviews:

Related manuals for Dynamo MFX-2530

Brands by name

Popular brands