Muratec Dynamo MFX-2530, Operating Instructions Manual

Page: 28 / 203

1.12
Getting started
Your machine prints incoming faxes and copies with a laser print engine. The
engine requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 74,000 normal letter-sized printouts (see
“Specifications,” page
AI
.1). By “normal,” we’re referring to the amount of text
and/or graphics on each page. This is based on an industry-standard test docu-
ment.
• The toner bottle — It yields 11,000 “normal”, letter-sized printouts (see
“Specifications,” page
AI
.1).
Unpacking
1
Unpack the new drum cartridge from its car-
ton. Then remove the seal from the cartridge.
2
Remove the packing materials (securing tapes and sponge(rear)) from the
drum cartridge.
Installing / changing the drum cartridge
1
Pull up the printer cover release (R
1
)
and open the printer cover.
If you change the old drum cartridge
to the new one, proceed to step 2.
Otherwise, skip to step 3.
Important: Never touch the electrical contacts inside the printer cover and
under the drum cartridge, as an electrostatic discharge may
damage the machine.
2
Grasp the green handles and gently
pull out the old drum cartridge. Then
lift it out by the handle on top.
Electrical Contacts
Sponge
Tapes
Seal
Installing / Changing the printing supplies
All manuals and user guides at all-guides.com