Muratec Dynamo MFX-2530 Operating Instructions Manual Download Page 30

Page: 30 / 203

1.14

Getting started

Shake the new toner bottle well and turn
it over lengthwise five times.

Note: Make sure to carry out the proce-

dure above to agitate the toner
before installing the toner bottle
in case the toner has settled.

With the seal on the toner bottle facing
up, slowly peel off the seal as shown at
right:

Note: Be careful, some toner may puff

out from the bottle.

With the “UP” marking on top, insert
and push the bottle up to the black
line on it.

Close the toner bottle cover.

Note: When the toner bottle cover is

closed, the machine automatically
starts replenishing the supply of
toner. During this period, do not
attempt to turn off the power switch
or open the printer cover.

All manuals and user guides at all-guides.com

Summary of Contents for Dynamo MFX-2530












































































































































































































Search results

Summary of Contents for Dynamo MFX-2530

Reviews:

Related manuals for Dynamo MFX-2530

Brands by name

Popular brands

Muratec Dynamo MFX-2530, Operating Instructions Manual

Search results

Summary of Contents for Dynamo MFX-2530

Reviews:

Related manuals for Dynamo MFX-2530

Brands by name

Popular brands