Muratec Dynamo MFX-2530, Operating Instructions Manual

Page: 119 / 203

Advanced fax
5
Select the file number (01-30) of the document you want to erase.
If you want to erase the all documents in this bulletin box, select file number
“00”.
6
Press [Enter].
The
LCD
shows (see right):
Important: If you want to quit without eras-
ing the document you’ve selected,
press [Cancel]. The fax will
return to step 2.
7
Press [Erase] to erase the document(s) and the
machine will return to step 2.
If you want to erase other document, repeat steps 2–7.
To return to the standby mode, press
RESET
.
Using a relay box
Once your fax machine receives a document via
ITU
-
T
sub-addressing to one of its
F-Code relay boxes, it sends it to the other fax machines that you’ve set up on your
relay box. (See “Creating or Modifying an F-Code box”, page 3.44–3.48.)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See “If you chose
Relay,” page 3.50 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine’s F-Code box and get that machine to relay it to others. See “F-Code trans-
mission” on page 3.52 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press
MENU
,
N
, [Enter].
2
Select the F-Code box you want to erase.
3
Press [EraseBox]. If the F-Code box is empty, the machine prompts you to
enter
I
.
D
. code.
4
Use the numeric keypad to enter your F-Code box’s four-digit
I
.
D
. code.
5
Press [Enter].
The
LCD
shows (see right):
Note: If you want to quit without erasing the F-Code box you’ve selected,
press [Cancel]. The machine will return to step 2.
Note: If you want to quit without erasing any F-Code box, press
RESET
. The
machine returns to standby mode.
6
Press [Erase] to erase the document(s) and the machine will return to step 2.
If you want to erase other F-Code box, repeat steps 2–6.
To return to the standby mode, press
RESET
.
02:Bulletin Box EraseDoc
00:All stored documents.
01:Already stored.
02:Already stored.
03:Not stored.
04:Not stored.
OK to erase?
Cancel Erase
3.51
F
ax F
eatures
Getting Started
All manuals and user guides at all-guides.com