Moxa Technologies AirWorks AWK-1131A User Manual Download Page 28 | Manualshive

Page: 28 / 82

background image

AirWorks AWK-1131A

Web Console Configuration

3-11

Setting

Description

Factory Default

5 GHz

A

Only supports the IEEE 802.11a standard

A/N Mixed

Supports IEEE 802.11a/n standards, but 802.11n might
operate at a slower speed when 802.11a clients are on the
network

N Only (5 GHz)

Only supports the 5 GHz IEEE 802.11n standard

Channel (for AP mode only)

Setting

Description

Factory Default

Available channels vary
with RF type

This option is only adjustable when the AWK-1131A plays the
role of wireless AP. If the device acts as a wireless client, it
follows the channel of the associated access point

6 (in B/G/N Mixed
mode)

Channel width (for any 11N RF type only)

Setting

Description

Factory Default

20 MHz

Select your channel width, If you are not sure which option to
use, select 20/ 40 MHz (Auto)

20 MHz

20/40 MHz

Channel bonding

Channel bonding shows the channel with which the AP will bond if

Channel width

is set to 20/40 MHz.

SSID

Setting

Description

Factory Default

Max. of 31 characters The SSID of a client and the SSID of the AP must be identical for

the client and AP to be able to communicate with each other.

MOXA

SSID broadcast (for AP mode only)

Setting

Description

Factory Default

Enable/ Disable

SSID can be broadcast or not

Enable

WLAN Security Settings

The AWK-1131A provides four standardized wireless security modes:

Open

,

WEP

(Wired Equivalent Privacy),

WPA

(Wi-Fi Protected Access), and

WPA2

. Several security modes are available in the AWK-1131A by

selecting

Security mode

and

WPA type

:

•

Open:

No authentication, no data encryption.

•

WEP:

Static WEP (Wired Equivalent Privacy) keys must be configured manually.

•

WPA/WPA2-Personal:

Also known as WPA/WPA2-PSK. You will need to specify the Pre-Shared Key in the

Passphrase

field, which will be used by the TKIP or AES engine as a master key to generate keys that

actually encrypt outgoing packets and decrypt incoming packets.

•

WPA/WPA2-Enterprise:

Also called WPA/WPA2-EAP (Extensible Authentication Protocol). In addition to

device-based authentication, WPA/WPA2-Enterprise enables user-based authentication via IEEE 802.1X.
The AWK-1131A can support three EAP methods: EAP-TLS, EAP-TTLS, and EAP-PEAP.

«
...
26
27
28
29
30
...
»

Summary of Contents for AirWorks AWK-1131A



















































































Reviews:

No comments

Related manuals for AirWorks AWK-1131A

Brand: D-Link Pages: 147

Brand: Positron Pages: 36

Wireless G54 USB

Brand: Sandberg Pages: 24

Brand: Sercomm Pages: 76

WLAN Access Point IP67

Brand: Anybus Pages: 12

Brand: Ubiquiti Pages: 17

Brand: LevelOne Pages: 71

Brand: TRENDnet Pages: 58

Brand: Hamlet Pages: 10

Brand: WoMaster Pages: 115

Brand: EnGenius Pages: 3

Brand: Datacom Pages: 105

Brand: QTech Pages: 24

Internet BWA System 3200

Brand: Nortel Pages: 68

Brand: Westermo Pages: 32

Brand: High-Flying Pages: 81

Brand: TECOM Pages: 17

Brand: ViewSonic Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands