Moxa Technologies AirWorks AWK-1131A User Manual Download Page 42 | Manualshive

Page: 42 / 82

background image

AirWorks AWK-1131A

Web Console Configuration

3-25

TCP/UDP Port Filters

The AWK-1131A’s TCP/UDP port filter is a policy-based filter that can allow or filter out TCP/UDP-based packets
with a specified source or destination port.

The AWK-1131A provides 8 entities for setting the range of source/destination ports of a specific protocol. In
addition to selecting TCP or UDP protocol, you can set either the source port, destination port, or both. The end
port can be left empty if only a single port is specified. Of course, the end port cannot be larger than the start
port.

The

Application name

is a text string that describes the corresponding entity with up to 31 characters.

Remember to check the

Active

check box for each entity to activate the setting.

TCP/UDP port filters

Setting

Description

Factory Default

Enable

Enables TCP/UDP port filters

Disable

Disable

Disables TCP/UDP port filters

Policy

Setting

Description

Factory Default

Accept

Only the packets fitting the entities on list can be allowed.

Drop

Drop

Any packet fitting the entities on list will be denied.

ATTENTION

Be careful when you enable the filter function:

Drop

+ “

no

entity on list is activated” = all packets are

allowed

Accept

+ “

no

entity on list is activated” = all packets are

denied

SNMP Agent

The AWK-1131A supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string

public

/

private

(default value). SNMP V3, which requires you to select an

authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.

SNMP security modes and security levels supported by the AWK-1131A are shown in the following table. Select
the security mode and level that will be used to communicate between the SNMP agent and manager.

«
...
40
41
42
43
44
...
»

Summary of Contents for AirWorks AWK-1131A



















































































Reviews:

No comments

Related manuals for AirWorks AWK-1131A

Brand: Ebyte Pages: 11

Brand: Sercomm Pages: 76

Brand: FS Pages: 12

Brand: SIYI Pages: 95

Brand: Ericsson Pages: 8

Brand: NC-link Pages: 26

Magic Box TREBL

Brand: Sprint Pages: 33

Brand: Digisol Pages: 29

Brand: peplink Pages: 30

Brand: Hamlet Pages: 10

Brand: TP-Link Pages: 2

Brand: Digi Pages: 9

Brand: Broadcom Pages: 10

Brand: QTech Pages: 24

Brand: MUNIC Pages: 14

Brand: Kathrein Pages: 20

Brand: U4EA Pages: 16

Brand: Jazz Hipster Corporation Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands