45
Placing/Receiving Calls
Setting the Operation of the Record Message
1
Press
in the stand-by display, select [Set msg], and press
.
Ｓｅｔ ｒｅｃｏｒｄ ｍｓｇ
Ｓｅｔ
Ｔｏ ａｎｓｗｅｒ １０ ｓｅｃ
（０１−２９）
Ｒｅｃ ａｎｓｗｅｒ ｍｓｇ
Ｍｓｇ ｓｅｔｔｉｎｇ Ｓｔｄ
ＯＦＦ
2
Enter the time before starting the answering message at [To answer].
Enter from 01 to 29 seconds.
3
Record an answering message at [Rec answer msg].
Talk into the microphone to record an answering message.
The recording stops automatically after about 10 seconds and [Msg setting] is automatically set
to [Orig].
When the answering message has been recorded before
The new message is saved by overwriting the old one.
To play back the answering message
Select [Msg setting], move the cursor to [Original msg], and press
(play).
To reset to the default answering message
Select [Msg setting]
→
[Standard msg].
4
Press
(cmplt).
The operation of the Record message is set.
●
When the Auto answer, the Voice Mail Service or the Call Forwarding Service are set together with the Record
message and you wish to give priority to the Record message, set the ring time before starting the answering
message shorter than that for the other function or service.
Note that the Voice Mail or the Call Forwarding Service operates after 3 messages are recorded.
Recording a Caller’s Message When Unable to Answer a Call Just Receiving
You can start the Record message manually for temporary use when receiving a call even
if the Record message is [OFF] (Quick record message).
• When 3 messages are recorded, the Quick record message no longer operates. Delete unnecessary messages.
1
Press
while receiving a call.
Ｐｌａｙ ａｎｓ ｍｓｇ
０３ＸＸＸＸＸＸＸＸ
The answering message is played back for the caller and heard through
the earpiece.
The caller’s voice is heard through the earpiece as the message is being
recorded.
Recor
d message/Quick r
ecor
d message