
102
i-mode
Use sites
Displaying Graphics Separately
When a graphic is not downloaded successfully or the Set image display (P.114) is [OFF],
the graphic to be displayed can be specified separately.
• The following icons show the status of the graphic.
1
While displaying a site, press
(option).
The submenu appears.
2
Select [indiv display]
→
a graphic and press
.
The selected graphic is displayed.
Displaying a Site URL
The URL of the site can be displayed. Up to 256 half-width characters (including http://)
can be displayed.
1
While displaying a site, press
(option).
The submenu appears.
2
Select [URL] and press
.
The URL of the site is displayed.
Displaying a Site Correctly
If the display of the text is incorrect on a site, you can reload the page after changing the
character code.
1
While displaying a site, press
(option).
The submenu appears.
2
Select [word translate] and press
.
The character code is changed and the page is reloaded. Repeat until the characters are
displayed correctly.
• The original display returns when repeating [word translate] 3 times.
●
The page may not be displayed correctly even if the character code is changed. Note that changing the
character code when the page is displayed correctly may cause the page to be displayed incorrectly.
The graphic is not yet displayed.
Failed to display the graphic.
Unable to display because of no graphic or an invalid graphic.