
116
i-mode
Receive message
Receiving a Message
When a message is received, the contents of the message are automatically displayed. Up
to 20 Message R (Request) and Message F (Free) each can be saved.
Receiving msg R
When receiving a message, the display on the left appears.
When receiving is completed, the indicator flashes, the ring tone sounds, and the number of
received messages is displayed.
The contents of the message appear automatically after about 5 seconds. The display before
receiving reappears after about 15 seconds when no operations are made.
“
” or “
” appears in the stand-by display.
• Messages that are automatically displayed are saved as unread.
●
When a total of 20 received messages is saved and a new message is received, the unprotected message is
overwritten from the oldest.
●
Messages or mail are held at the i-mode center when “
” appears (sometimes “
” does not appear even if
messages or mail are held at the i-mode center).
Setting Auto-display
The contents of the message can be automatically displayed when it is received. You can
also select which message should be displayed first when receiving both Message R and
Message F at the same time.
1
From the i-mode menu, select [i-mode setting]
→
[Mail/Msg]
→
[Auto-display] and
press
.
The Auto-display appears.
[Prefer Request]
: Display automatically Message R first when receiving Message R and Message F at the
same time.
[Request only]
: Display automatically Message R only.
[Prefer Free]
: Display automatically Message F first when receiving Message R and Message F at the
same time.
[Free only]
: Display automatically Message F only.
[No display]
: Do not display automatically.
2
Select the display method and press
.
The Auto-display is set.