
170
Network Services
The Call Waiting Service
The beeps notify you of an incoming call that arrives
during a call. You can answer the incoming call by putting
the current call on hold.
Operations from the Mova
Receiving an Incoming Call During a Call
1
When receiving a call, press
.
The current call is put on hold and the incoming call can be
answered.
When a call is put on hold, the message “Conference call”
appears.
• Every time you press
, you can switch between the first
and second calls.
To disconnect a call put on hold
From the submenu, select [End holding].
Ending the Call to Answer an Incoming Call
1
When receiving a call, press
.
The current call is disconnected, and the ring tone sounds for
the incoming call.
2
Press
.
The incoming call can be answered.
●
If the Caller ID Display Request Service is “ON” and you
receive a “User unset” call, the caller ID request guidance
is played back (the Call Waiting Service cannot be used in
this case).
●
The Call Waiting Service is not available in the following
cases:
-
During a call to the number 110, 119, 118, 117 or 104
-
While performing data communication
-
While dialing, or when waiting for the recipient to pick
up your call
-
While the call is connected to the Voice Mail Service
Center
-
While the call is forwarded to the specified number
●
Even if the call is put on hold, the caller is charged for the
call.
The Call Forwarding Service
●
The Call Forwarding Service forwards a call automatically when
the Mova is outside the service area or powered OFF.
●
The Call Forwarding Service is available within any service area
in Japan.
• You can save up to 5 numbers to which calls can be forwarded.
• This service forwards incoming calls on the Mova to your office,
home, etc.
• You can answer the call while the transfer tone (P.56) keeps
sounding. The length of the transfer tone (ring tone duration)
can be changed.
• When the Voice Mail Service is activated, the Call Forwarding
Service is automatically deactivated.
• If the Caller ID Display Request Service is “ON” and you receive
a “User unset” call, the caller ID request guidance is played
back (the Call Forwarding Service cannot be used in this case).
• You cannot receive calls using the Collect Call (charges paid
by the recipient of the call) when the Call Forwarding Service is
activated.
• Some charging plans may not be available.
Basic Flow of the Call Forwarding Service
Step 1
Save the forwarding number.
Step 2
Specify the forwarding number, and activate the Call
Forwarding Service.
Step 3
Receive a call on the Mova.
Step 4
If you do not answer the call, it is automatically forwarded
to the specified forwarding number.
Step 5
The caller is connected to the forwarding number.
Operations from the Mova
★
This service is only available to users subscribing to the “Voice
Mail Service” at the same time.
→
Main Menu
→
→
Designate List Number
→
Save Forwarding
Number
→
→
→
→
Designate List Number
→
↓
→
→
→
→
Main Menu
→
→
Ringer Time Setting
→
→
Main Menu
→
→
Set
→
→
Main Menu
→
→
Confirm
→
★
To connect to the Voice Mail
Service Center when there is
an incoming call while a call
is being forwarded or when
the forwarding number is
busy
Save a
forwarding
number
Start the
service
Stop the
service
Set the
ring tone
duration
Set the
forwarding
guidance
ON/OFF
Check
settings
The Call W
aiting Ser
vice/The Call For
war
ding Ser
vice
Start the
service
Stop the
service
(The guidance is played back and the service is set
to ON.)
(The Call Waiting Service is not available. The caller
hears a busy tone.)