Mountz SDC-24, Operation Manual

Page: 17 / 94

6. Controller
6.1 Specification
no Item
Specification
SDC-24 series SDC-40 series
1 Rated Input AC120VC or AC220V, 50~60Hz
2 Rated Output DC24V, 5A DC40V, 3A
3
Control
Range
Torque 0.1 ~ 15.0 Kgf.cm 1 ~ 28.0 Kgf.cm
Speed 100 - 1,000 rpm 300 - 1,000 rpm
Angle 0.4
°
step
4 Preset parameters Torque, (Speed) & Angle
5 Preset # selecting
1) Front panel button
2) 25P I/O interface
6 Torque calibration - 10% ~ +10%
7 Auto recognition
Auto detection of connected driver when power ON
of controller
8 Error display Error code display ( 3 groups )
9 Fastening quality control
Fastening data verification (NG/OK) against the pre-
setting pattern of angle.
10 Screw Counter
Total 8 programs of tightening screw number and
sequence
11
Parameter setting and
monitoring MS Windows PC software, Smart-Manager
or front panel
12 Operating environment 0 ~ 40
℃
/ 15 ~ 80% RH ( without dew )
1080 N 11th St - San Jose CA 95112 - mountztorque.com 17