※
Detailed Explanation of JUMP, COU
N
T VALUE=A, SUB IF(A) Commands
■ Example of Multi Sequence Program
The multi sequence starts from STEP 1 in a low. The above multi sequence shows 10
times repeat of STEPs from step 2 to 7, and
finishes a cycle completely.
- Count Value = A
Count the number of step selected or operated.
- Sub If (A)
If the counted number of cycle is not 10 (on Step 1, Count Value=A), is not 10, go to
the next Step 8.
If the counted number of cycle is 10 (on Step 1, Count Value=A), go the next Step 9.
-
Jump
Move to the set Step 2.
1080 N 11th St - San Jose CA 95112 - mountztorque.com
87
Summary of Contents for SDC-24
Page 12: ...SD400 SD600 SD1000 SD1500 SD18N SD28N 1080 N 11th St San Jose CA 95112 mountztorque com 12...
Page 69: ...2 Direct Wiring to 25P I O Interface Port 1080 N 11th St San Jose CA 95112 mountztorque com 69...
Page 90: ...9 Screw Count Monitoring Single 1080 N 11th St San Jose CA 95112 mountztorque com 90...
