Mountz SDC-24, Operation Manual

Page: 3 / 94

2) Torque Unit P10 25
3) Rotation Speed (Not Recommended)
P11~18
25
4) Min. Angle Control for Fastening Quality Monitoring P21~28 26
5) Max Angle Control P31~38 27
6) Soft Start Setting
P41~48 28
7) Free Speed Setting P51~58,P84,P102 29
8) Min. Angle Setting on P21~28 and NG type Selecting P78 29
9) Max Angle Setting on P31~38 and OK/NG Verification P79 29
10) Output Pin #5 Management (Driver Lock / Angle Count P86 30
Reset)
11) Auto Speed by Torque Setting P88 30
7.6.2 Fastening Sequence 30
12) Torque Control Profile Setting P63~73 30
13) Motor Acceleration P40 31
7.6.3 Advanced Function
32
14) Free Reverse Rotation Setting
P85, P98, P100,
P101
32
15) Engaging Torque Detection Setting P103~109 33
16) Auto Reverse Setting P110~114 35
7.6.4 Controller Setting 36
17) 25P I/O Interface Setting P20
36
18) FND Display ( for FND version only ) P29 37
19) Auto Fastening Data Output P30 37
20) Torque Compensation P39 38
21) Com Port Select P49 38
22) Initial Loosening Speed P50 38
23) Converted Torque Limit P59 39
1080 N 11th St - San Jose CA 95112 - mountztorque.com 3