Mountz SDC-24, Operation Manual

Page: 21 / 94

7.2 Parameter Number Group
Number Main contents Description
1- 8 Torque Save the target torque from 1-8.
11-18 Rotation speed Save the rotation speed for P1-P8.
21-28
Min. rotation turn for
OK/NG verification
Save the minimum rotation turn or running time for OK
fastening of P1-P8.
31-38 Max turn
Save the limit number of turn for P1-P8.
(It stops at the limit number of turn and torque.)
41-48 Soft start time Change time to the target speed.
51-58
Free speed angle
(turn)
Screwdriver runs with the speed set on P84 as per the
angle value on P51 - 58. And it changes to the original
speed set on P11
–
18.
"0" = Disable
61-89 Other parameters Change of other parameters
130-137 Screw Counter Screw counter related to pattern setting (Total count)
138-139 Model setting Model related selecting model and auto sequence
140-179 Counter- Model Parameters of fastening sequence of each model
180-199 Multi sequence Multi sequence data
200-207 Error history The latest error number record from P200 to 207
209 Version Firmware version
1080 N 11th St - San Jose CA 95112 - mountztorque.com 21