43) Auto Sequence Enable/Disable
7.6.7 Driver Setting
44) Initial Preset # Display on the Front Panel
45) Screw Type ( Clockwise or Counter-clockwise )
Number
Unit
Range
Initial
P19
1 or 2
1
Description
It selects one of the screw type below
;
"1" : Clockwise "2" : Counter-clockwis
e
The initial value is "1" for "Clockwise
"
After selection change, power off the controller and on again.
46) Password
Number
Unit
Range
Initial
P75
0 ~ 9999
0000
Description
Factory setting password is " 0 " at the initial.
Password can be changed between 0 - 9999 on P75.
Number
Unit
Range
Initial
P139
0 or 1
0
Description
Total 20 preset # can be programed for automatic sequential fastening
when Model feature on P138 is enabled.
"0" : Disable "1" : Enable
Number
Unit
Range
Initial
P9
1 ~ 10
1
Description
The default setting of preset # can be selected between 1 to 8 and Multi
A/B on P09.
[ 1, 2, 3, 4, 5, 6, 7, 8, Multi_A, Multi_B ]
1080 N 11th St - San Jose CA 95112 - mountztorque.com
47
Summary of Contents for SDC-24
Page 12: ...SD400 SD600 SD1000 SD1500 SD18N SD28N 1080 N 11th St San Jose CA 95112 mountztorque com 12...
Page 69: ...2 Direct Wiring to 25P I O Interface Port 1080 N 11th St San Jose CA 95112 mountztorque com 69...
Page 90: ...9 Screw Count Monitoring Single 1080 N 11th St San Jose CA 95112 mountztorque com 90...
