Button
Log-in Mode
Log-in is required for parameter setting with password.
Initial password "0" can be changed on P75.
Parameter Mode Cursor shifts up to left at the Parameter mode.
Button
Auto(Work) Mode
Select the next preset number(when P115=1 is enable) or Model
no. select. (when P138=1 is enable)
Log-in & Password It increases the number up.
Button
Auto Mode (Operation) It moves the cursor downward.
Parameter Mode
It decreases the number down.
Jog Mode
Manual start / stop in reverse rotation
Enter button
Parameter Mode It selects or saves the chosen display.
Jog Mode
Manual start / stop in Forward rotation
Button
It returns to the previous mode. Also it resets the error.
RESET
1080 N 11th St - San Jose CA 95112 - mountztorque.com
20
Summary of Contents for SDC-24
Page 12: ...SD400 SD600 SD1000 SD1500 SD18N SD28N 1080 N 11th St San Jose CA 95112 mountztorque com 12...
Page 69: ...2 Direct Wiring to 25P I O Interface Port 1080 N 11th St San Jose CA 95112 mountztorque com 69...
Page 90: ...9 Screw Count Monitoring Single 1080 N 11th St San Jose CA 95112 mountztorque com 90...
