1-12
User’s Guide
Getting Started
1
5. Make sure the voltage switch on the back of the computer is set to
the correct voltage for your location.
The voltage switch must be set correctly to avoid damaging your
computer. If you do not know the voltage used your country, refer
to Voltages for different locations on page 1-15.
!
Warning
If the voltage switch is set incorrectly and you plug it
into an outlet, even before powering the computer on,
the power supply will blow a safety capacitor.
115
230
Set the switch to show “115” for
voltages in the 100-130V range.
Set the switch to show “230” for
voltages in the 220-270V range.
Check to see that the voltage switch
is properly set before you plug it in.
If you need to change the setting,
insert a small screwdriver here and
slide the switch.
