Motorola MTP3200 Feature User Manual Download

Page: 127 / 136

Appendix A: Tones

To listen to the audio signal tones samples, refer to the PDF file with the embedded sound files.

Table A-1

Radio Tones

New Tone

Classic Tone

Tone Description

Default Beep — Played when pressing a key.

Duplex Volume Set — Played when adjusting duplex volume.

Invalid Action

Examples:

• Pressing an invalid key.

• Dialing an invalid number.

• Talk prohibit.

System Notification

Examples:

• The radio changed its status from out-of-range to in service.

• The radio returned to the home network.

• Toggling between the TMO and DMO modes.

System Error

Examples:

• The radio changed its status from in service to out-of-range.

• Call disconnected.

General Notification

Examples:

• Entering Local Site Trunking.

• Entering the Transmit Inhibit Mode.

Positive Notification — Message sending succeeded.

Negative Notification — Message sending failed.

Item Received — A new message received.

A-1

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands