Motorola MTP3200 Feature User Manual Download

Page: 132 / 136

Feature User Guide

Table C-1

Displayed Messages (cont'd.)

Message

Message Description

Message Delivered

Indicates mail successfully delivered.

Message Failed

Indicates mail delivery failure.

No Service

Your radio is outside coverage. Return to coverage.

My Groups
Is Empty

You cannot view/delete groups when the

My Groups

folder is

empty.

My Groups
Is Full

You are not allowed to add a group to the

My Groups

folder as it

already contains the maximum allowed number of groups.

Network Trouble

Network problems. Please try again later.

No Answer

The called party does not answer.

No Entries

This message is displayed when accessing an empty list.

No Group

• Attachment failed. Your radio detached from current talkgroup.

Please wait until it attaches again to the current talkgroup.

• Displayed when you are out of the normal coverage area of your

selected talkgroup. Please select a new talkgroup that is valid for
your working location.

• Indicates a favorite group was removed from the

My Groups

folder.

No List

The network list is empty.

No New or Old Messages

Indicates there are no new or old messages in the

Inbox

No Selected Scan List

You selected an empty network list.

No Service

Your radio is out of coverage.

Not Allowed To Initiate Call

You are not allowed to dial a number which is not in the address
book.

Not Allowed To Transmit

Release the

PTT

button and try again later. You are not allowed to

send a text message or a status message to a number which is not in
the address book.

Single TalkGroup Only

There is only one programmed entry in the scrolling list.

Overheating, Please Turn Radio Off

Your radio turns off. Keep it turned off for 5 minutes.

Party Busy

Called radio is busy.

Party Not Available

Called radio is out-of-range or turned off. Please try again later.

Please Try Again

You could not call.

Please Wait Connecting

A message during startup.

Registration Failure

Your radio could not register within the system. Please try again
later.

Service Denied

Invalid number. Call your service provider.

Service Not Available

This service is not available on the current network.

C-2

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands