Motorola MTP3200 Page 117 Feature User Manual Download

Page: 117 / 136

5.14.1 Enabling/Disabling SIM Card End-to-End Encryption

• Encryption of messages transmission in the TMO Mode.

• Encryption of messages transmission in the DMO Mode (the radio cannot be in call).

• Encryption of position data (GPS) transmission in the TMO and DMO Modes.

• Transfer of Operational Tactical Address (OPTA) in the TMO and DMO Modes.

• Management of encryption keys in the TMO Mode.

SIM Card End-to-End Encryption

5.14.1 Enabling/Disabling SIM Card End-to-End Encryption

Procedure Steps

From the home screen, press

MENU

key.

Select

Crypto Menu → Crypto Funct.

Select

Encryption On

to enable or

Encryption Off

to disable the End-to-End Encryption.

5.14.2 Setting Alarm Tone

When and where to use:

Use this menu item to turn on/off the Alarm Tone notifying about any clear transmission.

Procedure Steps

From the home screen, press

MENU

key.

Select

Crypto Menu → Clear CallTone

Select

Alarm Tone On

to enable or

Alarm Tone Off

to disable the Alarm Tone.

5.14.3 Updating Encryption Keys

When and where to use:

Use this menu item to update old or incorrect encryption keys.

5-57

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands