Motorola MTP3200 Feature User Manual Download Page 133

Page: 133 / 136

Appendix C Troubleshooting

Table C-1

Displayed Messages (cont'd.)

Message

Message Description

Service Restricted

This service is by your service provider, it has not been purchased,
or it is not available.

TalkGrp

...

cannot be deleted

Your service provider set this group so you cannot delete it from the
favorite talkgroup folder.

Try Again Later

The requested service is temporarily unavailable.

Radio Disabled

Check with your service provider.

Unit is OK
Warn:

Self-test error. A minor fault has been detected. Your radio is still
fully operative. If this error recur, note the error code and contact
service.

Unit Not Attached

You radio could not attach to the system. The talkgroup may not be
defined in the system. Please try another group.

C-3

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands