Motorola MTP3200 Feature User Manual Download | Manualshive

Page: 51 / 136

background image

3.6.1 Emergency Operation

3.6.1 Emergency Operation

Emergency operation is available in TMO and DMO Mode. You can initiate an Emergency Group Call to a
pre-programmed group. You can receive an Emergency Group Call:

• From the selected pre-programmed talkgroup.

• From an open group (An open group is a super-group to which all DMO groups belong).

Emergency calls can be placed through the gateway or repeater.

3.6.2 Silent Emergency Mode

The Silent Emergency Mode is a type of emergency services that provides no audible indications and no keypad
tones at the entrance. All the display indications are as in the idle mode. However, the radio cannot use any
services except for:

• Receiving Ambience Listening

• Sending Silent Emergency Alarms

• Sending GPS location reports

If you try to activate any other feature, it is blocked and no indication is displayed.

If the Silent Emergency feature is enabled, the radio enters Silent Emergency Mode on pressing the

EMERGENCY

button. After entering the Silent Emergency Mode, the radio guarantees itself to be in TMO Mode. The radio
stays in TMO Mode or switches to it, depending on the actual state. Once in TMO Mode, the radio sends Silent
Emergency Alarm.

If the radio is in a private or group call, the radio waits until the call ends and then enters the Silent
Emergency Mode.

The radio keeps re-sending the alarm until successful sending is confirmed. After the alarm is successfully delivered,
the radio stays in Silent Emergency Mode and waits for the Ambience Listening. On pressing the

EMERGENCY

button again, while being in the Silent Emergency Mode, the radio sends the Silent Emergency Alarm (and does not
provide any audible or visible indications).

Your radio exits the Silent Emergency Mode, under the following conditions:

• Press

MENU

simultaneously with right

NAVIGATION

key.

• Press both

SOFT

keys simultaneously.

• No success in sending the Silent Emergency Alarm and the maximum number of retries has been reached.

• The control room terminates the Silent Ambience Listening.

• The Ambience Listening is disconnected due to another reason.

If you turn off the radio in the Silent Emergency Mode, the radio switches to pseudo power off state. In this state, the
radio appears to be turned off. However, the radio is still on and in the Silent Emergency Mode. On turning the radio
on during the pseudo power off state, the radio acts as during turning on and still is in the Silent Emergency Mode.

-

3-11

«
...
49
50
51
52
53
...
»

Summary of Contents for MTP3200









































































































































Reviews:

No comments

Related manuals for MTP3200

Brand: Sangean Pages: 1

Brand: Audiovox Pages: 37

Brand: GOWIN Pages: 2

Brand: Logitech Pages: 7

Brand: Hytera Pages: 11

Brand: Wacker Neuson Pages: 52

Brand: SMC Networks Pages: 40

Brand: Craig Pages: 7

Brand: NAVICOM Pages: 27

Brand: NAVICOM Pages: 30

Brand: Navico Pages: 54

Brand: Sony Pages: 44

Brand: Sony Pages: 46

Brand: iPower Pages: 128

Brand: Denver Electronics Pages: 5

Brand: Denyo Pages: 47

Brand: Denver Pages: 2

Brand: Denver Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands