Motorola MTP3200 Feature User Manual Download

Page: 124 / 136

Feature User Guide

Procedure Steps

From the home screen, press and hold right

NAVIGATION

key and enter the number.

Private

is not the first type of call presented, press

Ctype

repeatedly to select it.

When you are in the following mode:

a. TMO — For a simplex call, press and release the

PTT

button. You hear a ringing tone. Otherwise, press

and hold the

PTT

button. Wait for the talk permit tone before talking, and release the

PTT

button to listen.

For a duplex call, press and release

SEND

key. You hear a ringing tone.

b. DMO — Only simplex call is available. Press and hold the

PTT

button. Wait for the talk permit tone

before talking, and release the

PTT

button to listen.

To end the call, press the

END

key.

6.6 Short Number Dial

This feature allows you to dial part of the full number of the person you wish to call. Your radio automatically
completes the number.

Example:

Your radio number is 4282564.

Dial 456 (instead of 4282456, the full number).

To place the call, press the

PTT

button or the

SEND

key.

6.7 SIM Card End-to-End Encryption

The table below presents interactions occurring between radios with and without the SIM card feature. The SIM
card provides End-to-End Encryption.

Table 6-1

Radios Interactions

Transmission Type

Transmitting Radio

Receiving Radio

Result

Private Call

SIM card

No SIM card

Call is muted (encrypted calls
cannot be received)

Private Call

No SIM card

SIM card

Warning: clear call

message

appears and the call is received

Group Call

SIM card

No SIM card

Call is muted (encrypted calls
cannot be received)

Group Call

No SIM card

SIM card

Warning: clear call

message

appears and the call is received

6-4

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands