Feature User Guide
Received Group Calls are not stored on the radio.
When no danger to safety exists anymore (for example, you leave the RF sensitive area), you can deactivate the
Transmit Inhibit Mode and the radio returns to standard operation.
You can deactivate the mode by selecting
MENU
→ Networks → TXI Mode → Deactivate
, pressing One-Touch
button, or implicitly when initiating an Emergency Call.
RF Transmissions from the radio are prevented under the following conditions:
• TXI Mode is activated
• Battery is removed
• Radio is turned off
3.6 Emergency Mode
The Emergency Mode is a mode of the highest communication priority.
In the Emergency Mode, the radio automatically rejects phone, PABX and private calls, and does not monitor the
talkgroups in the selected scan list. However, if an ATG is the selected group, the radio monitors the sub-groups
associated with the ATG.
On entering the Emergency Mode, any ongoing voice call is aborted or cleared down. Any packet data transfer in
progress is aborted. However, the session is kept open.
The radio remains in the Emergency Mode until you or the originator ends the Emergency Group Call.
Pressing the
EMERGENCY
button or entering Emergency number and pressing
SEND
key, can be used to activate
one or more services (depends on the service provider setting):
• Entering Emergency Mode
• Sending Emergency Alarm
• Starting Hot Mic operation
• Starting Emergency Individual Call
• Powering up the radio in Emergency Mode
• Sending the GPS location information
• Entering Emergency Mode even if TXI Mode is activated, causes immediately your radio
to transmit. When entering the Emergency operation, your radio should not be within
the RF sensitive area any longer.
• Your radio interrupts the AL call, when you trigger Emergency Mode.
3-10
-
