Motorola MTP3200 Feature User Manual Download

Page: 54 / 136

Feature User Guide

3.6.9 Entering Emergency Mode

Press and hold the

EMERGENCY

button or enter the Emergency number and press

SEND

key to enter the

Emergency Mode.

The required time you need to press the

EMERGENCY

button is set to 0.5 second (by default). The

time can be configured by your service provider.

Upon entry into Emergency Mode any existing call or service other than packet data service is aborted or cleared
down. In the Emergency Mode, the radio automatically rejects private calls. The radio remains in Emergency
Mode until you exit it.

3.6.10 Exiting Emergency Mode

Prerequisites:

Make sure that your radio is in Emergency Mode.

Procedure Steps

If your radio screen displays

Emgcy Mic On

, press

End

Press and hold

Exit

Result:

Your radio exits the Emergency Mode.

3.6.11 Making an Emergency Group Call

Prerequisites:

Make sure that your radio is in Emergency Mode.

Procedure Steps

Press and hold the

PTT

button.

Wait for the talk permit tone (if configured) and talk.

Release the

PTT

button to listen.

3.6.12 Receiving an Emergency Group Call

A radio receives an Emergency Group Call from the selected pre-programmed group. Audible tone indicates
incoming Emergency Group Call.

3-14

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands