Motorola MTP3200 Feature User Manual Download

Page: 29 / 136

2.6 Status Icons

Table 2-8

Status Icons (cont'd.)

Icon

Description

Scan — Indicates talkgroup scanning is activated in the radio.

Priority Scan — Indicates that priority scanning is activated in the radio.

Data Connected — Displayed when the Packet Data feature is activated and the external
device sets up data connection with the radio.

Data Transmit/Receive — Displayed when the Packet Data feature is activated and the
external device sets up data connection with the radio.

• No number — standby data session.

• Number 1, 2, 3, or 4 — indicates active data session with 25%, 50%, 75%, or 100%

bandwidth.

Direct Mode Operation

Signal Strength (DMO) — Indicates an incoming Direct Mode Group Call.

Direct Mode — Displayed when the radio is in Direct Mode.

DMO Gateway Communication Mode — Indicates that gateway is selected. The icon
has the following states:

• Solid — while the radio is synchronized with the gateway.

• Blinking — while the radio is not synchronized or during attachment.

• No icon — during a radio to radio and repeater call.

DMO Repeater Communication Mode — Displayed when the

Repeater

GW + Rep

option in DMO Mode is selected. This icon has the following states:

• Solid — while the radio has detected the repeater (for example when the radio receives

a presence signal).

• Blinking — while the radio has not detected the repeater or during attachment.

• No icon — during a radio to radio and gateway call.

General Icons

All Tones Off/Duplex and Simplex Ring Muted — Indicates that all alert tones are off in
the radio or both simplex ring volume is set to 0 and duplex ring volume is set to 0.

Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.

Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.

Speaker Off (Low Audio) — Indicates that the audio will sound through the earpiece.

Low Audio — Indicates that the audio mode is changed to low.

High Audio — Indicates that the audio mode is changed to high.

Earpiece Connected — Indicates that the earpiece is connected.

2-13

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands