Motorola MTP3200 Feature User Manual Download Page 22

Page: 22 / 136

Feature User Guide

Procedure Steps

Insert the connector on the charger into the socket at the base of the radio.

• Motorola approved chargers provide optimum performance. Other chargers may not fully charge

your Motorola Lithium- Ion battery or may reduce the life of the battery.

• Battery charging must occur only in non-hazardous areas.

• After charging, make sure that your battery and your radio temperature are in the operation

temperature range.

Select the required plug adapter and connect to the charger.

Plug the charger into a suitable mains socket.

2.3.6 Charging Your Radio with USB Cable

Prerequisites:

Download a USB driver from:

http://www.motorolasolutions.com/MTP3000

and install it on

your computer.

Procedure Steps

Turn on the radio.

Connect the radio to the computer with the USB cable.

When you connect the USB cable to the radio with fully charged battery without turning the radio on first, a
red LED indication occurs at the top of the radio. This can be cleared by turning the radio on.

2.3.7 Charging Indicators

When your radio is turned on while charging, it displays an icon of the battery in charging.

When your radio is turned off while charging, it displays:

• The icon of the battery in charging.

•

Charger Mode

message.

• Charging completion expressed in percent. When the battery is fully charged,

Charging Complete, Unplug

Charger

message appears.

2-6

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands