Motorola MTP3200 Feature User Manual Download Page 101

Page: 101 / 136

5.7.8.7 Setting Automatic Update for the Time and Date

Select

Setup → Time & Date → Set → Time Offset

Enter time offset using

NAVIGATION

keys.

You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.

Press

Done

5.7.8.7 Setting Automatic Update for the Time and Date

Procedure Steps

From the home screen, press

MENU

key.

Select

Setup → Time & Date → System Update

Select one of the following:

•

Off

— All the infrastructure informations are ignored. The radio uses internal time and offset.

•

Time Only

— Time displayed is calculated from the offset programmed by your service provider

added or subtracted from the infrastructure time.

•

Time & Offset

— Time and offset are updated after receiving from the infrastructure.

5.7.9 Energy Economy

Energy Economy

(EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time

slots of the Main Control Channel. If the radio is in the charger,

Energy Economy

mode is not needed.

5-41

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Brands by name

Popular brands