Motorola MTP3200 Page 26 Feature User Manual Download

Page: 26 / 136

Feature User Guide

Table 2-5

Controls and Indicators

Annotation

Description

TALKGROUP KNOB

Rotate to select a different talkgroup.

VOLUME KNOB

Rotate to set the volume.

TOP MICROPHONE

Activated during Simplex, high audio calls such as Group Calls.

LED

SIDE

button

Programmable button, by default, the upper

SIDE

button is set to Backlight feature and

the lower

SIDE

button is set to Hi/Low Audio feature.

The required time to press and hold

SIDE

button to activate an One-Touch

Button feature is set as default to 0,1 second.

PTT

(Push-To-Talk)

• Press and hold to talk in simplex calls or to initiate a group call, release it to listen.

• Press to send status and text messages.

SOFT

key

Press left or right

SOFT

key, to select the option that appears on the screen directly above

the them.

SEND

key

Press to initiate or answer duplex calls, or send messages.

BOTTOM MICROPHONE

CHARGER CONNECTOR

ANTENNA

EMERGENCY

button

Press and hold

EMERGENCY

button to enter Emergency operation. When your radio is

off, press and hold to power on in Emergency Mode.

ACCESSORY CONNECTOR

Provides connection for accessories and cable for data transfer.

2-10

Summary of Contents for MTP3200








































































































































Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands

Motorola MTP3200, Feature User Manual

Search results

Summary of Contents for MTP3200

Reviews:

Related manuals for MTP3200

Brands by name

Popular brands