MH-50B Chemistry Analyzer Operation Manual
31
Appendix 1: Input Method
The correspondent relation of cursor keys to ENGLISH characters are as follows:
1
→
A,B,C
2
→
D,E,F
3
→
G,H,I
4
→
J,K,L
5
→
M,N,O
6
→
P,Q,R
7
→
S,T,U
8
→
V,W,X
9
→
Y,Z,(null)
0
→
-,.,/,
α
,
β
,
γ
,
δ
,
ε
,
ζ
,
η
,
θ
,
ι
,
κ
,
λ
,
μ
,
ν
,
ξ
,
ο
,
π
,
ρ
,
σ
,
τ
,
υ
,
φ
,
χ
,
ψ
,
ω
.
Press ‘1’ key one time and you will get A.
1---------------- A
Press ‘1’ key twice quickly and you will get B.
1 & 1----------- B
Press ‘1’ key three times quickly and you will get C.
1 & 1 & 1----- C
You can get the others alphabet and mark with the analogy.……
Appendix 2: Change the printer-paper
①
Open the printer cover interface, press ‘FEED’, press it again to stop it after output the residual
paper, get the surplus paper out.
②
Put the new Paper Scroll in Paper Groove, the thermal printer paper are
different in two sides, so
pull the end of paper out when the thermal side downwards;
③
Take the roll axis out upwards, put the thermal side under the roll axis as the chart, the paper’ s
direction should be vertically with the one of the roll axis, it avoids the printer paper locked so that it
can’t print normally;
④
Install the print roll axis, put the gear in the right side of the printer, then put another side and press
it to lock it tight;
⑤
Press ‘FEED’, adjust it if the paper can’t get out or it’s direction is not vertically with the one of roll
axis, or it can’t work; press ‘FEED’ to stop it after print a segment(When paper get out of the cover
board)
⑥
Pull the paper out of the cover board, close it;
Attention:
“FEED” function consists in Main menu, Test sample interface, Waiting keyboard input
interface, “PRINT/DELETE RESULT REPORT” interface and Q.C. report interface can be used in
“RESULT REPORT”, close “FEED” function in other interfaces.
Cover Board
Output paper
Roll-axis
The non-thermal face
Paper groove
Paper Scroll
