MH-50B Chemistry Analyzer Operation Manual
25
Chapter 6 System Installation
This menu mainly consists in “MAINTAIN” submenu. Press ‘6’ to enter it in main menu:
1. Temperature Rectify
You can change or install temperature with ‘
→
’ ‘
←
’keys with 1
℃
unit, or ‘
↓
’ ‘
↑
’ keys with 0.1
℃
.
test temperature to observe the movement of the colorimetric cell.
2. Clean Time
You can set the clean time in ‘0—999’ at will according to this function, this installation must clean
the tube, the consent value is 700, it can be adjusted according to the actual event.
3. ADC
It shows the internal AD transfer parameter of the instrument, repairmen use it in repairing.
4. Printer and communication
4.1 Set Printer
a. Print
Content:
Select ‘1—PRINT ALL RESULTS’, then to print report in ‘RESULT REPORT’, it will print all patients
and results in internal memory.
Select ‘2— PRINT THE RESULTS THAT DAY’, then to print report in ‘RESULT REPORT’, it will print
all patients and results in internal memory for that day. (General select mode 2)
√
1-PRINT
ALL
RESULTS
2-PRINT
CURRENT
RESULTS
PRT AND COM
1-PRT SETUP
2-COM SETUP
SET TEMPERATURE: 37.00
CELL TEMPERATURE: 36.99
FAN STATE: OFF
0-CONTROL/UNCONTROL TEMP
1-TURN ON/OFF FAN
1-TEMP
ADJ
5-ABSORBANCE
2-CLEAN TIME
6-DATABASE
3-ADC
7-UPDATE
4-PRT AND COM
8-CLOCK SETUP
