MH-50B Chemistry Analyzer Operation Manual
26
b. Print
Format:
You can select the time to print the report.
①
If you don’t print report during test, setting the print state to ‘1’;
②
If you print a report for every sample, setting the print state to ‘2’ .
c. Modify report head, select ‘MODIFY REPORT HEAD’ interface as below:
The second row shows the modified report head the last time. If there is no modification, the consent
report head is “EK-50 REPORT”, it will recover to consent “EK-50 REPORT” when recovering the
system.
You can input 20 characters most for this.
d. Setting doctor’s autograph
Enter “SAVE DOCTOR’S NAME” to add a doctor’s autograph, select “SET DEFAULT DOCTOR’S
NAME” to install a consent doctor’s autograph and print it in report list, enter “DELETE DOCTOR’S
NAME” to delete a doctor’s autograph. The installation result will be shown at the last row of the
report list after installing the consent doctor’s autograph.
①
SAVE DOCTOR’S NAME
Input the doctor’s autograph when it suggests “Please input doctor’s autograph”, it can’t be more than
8 characters, the input method state is shown in the right under side of screen(Consent: ENGLISH),
press “MENU” to enter “INPUT METHOD SELECTION” interface, or select other input methods.
It can save 10 doctors’ names at most, if it is more than 10, system will suggest “MEMORY IS FULL,
DELETE IT THEN SAVE”.
②
SET DEFAULT DOCTOR’S NAME
The consent state is “NO INSTALLATION AUTOGRAPH”, if you print the doctor in report list, press
‘
←
’ ‘
→
’ to search the saved doctor’s name, press “ENTER” to install and press ‘MENU’ to quit.
③
DELETE DOCTOR’S NAME
Press ‘
←
’ ‘
→
’ to search name after entering “DELETE DOCTOR’S AUTOGRAPH” interface, press
“ENTER” to delete and press “MENU” to quit.
1-SAVE DOCTOR’S NAME
2-SET DEFAULT DOCTOR’S NAME
3-DELETE DOCTOR’S NAME
INPUT REPORT HEADER:
EK-50 REPORT
√
1-AUTO PRINT ALL OFF
2-AUTO
ON
