Surveyor Central
1-8
Caution:
Periodic Safety Inspections
Follow the recommended maintenance schedule, including the manufacturer of the server/workstation.
Periodically inspect all power cords, transmission cables, and computer cables for fraying, pinching and
any other damage. Broken or frayed wires may cause interference, a loss of signal, and pose a shock
hazard. Pay particular attention to points where wires enter connectors. Replace any cable that is
suspect. Avoid sharp cable bends; protect cables on the floor from wheels of carts, cabinets and any
pinching or floor traffic.
Sterilizing this Product
Do not sterilize this product or any accessories unless specifically directed by the manufacturer.
Sterilization and sterilization environments can seriously damage many components and accessories.
Liquid Spills
Do not set beverages or other liquids on or near the Surveyor Central, and/or optional equipment.
General Cleaning Safety Precautions
• Never use solvents or flammable solutions to clean the workstation.
• Never immerse any parts in water or cleaning solutions. Apply any liquids to a clean cloth and
then use the cloth on the component.
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......