![background image](http://html1.mh-extra.com/html/mortara/surveyor-central-3-x/surveyor-central-3-x_service-manual_1836784008.webp)
Surveyor Central
1-4
In order to be safely used, all accessories (such as monitors, printers, data network, etc.) must be
compatible, and comply with all safety and EMC regulations that apply to them according to their
intended use; for use in Europe, these accessories should be CE marked.
The various parts of a Surveyor Central monitoring system (Telemetry receiver computers, control
and display computers, storage computers, printers, or bedside monitors) are all connected through a
specific Ethernet data network. This network must be installed according to all applicable standards
and may only be logically or physically connected to the outside world through a specific routing
device available from Mortara Instrument. Any other data path can lead to serious security risks and
interruptions of monitoring. Any other devices must not be connected to the Surveyor data network.
The Surveyor Central, as all medical equipment or systems, needs special precautions regarding
EMC and needs to be installed and put into service according to the EMC information provided in the
installation procedure in order to obtain a sufficient degree of immunity as well as not to create
disturbance to other equipment. Refer to the specific EMC instructions in this manual.
Cleaning must be performed with the device turned off. Let all parts dry well before turning the power
back on.
Install all computer equipment with adequate space around ventilation vents. Clean and remove
accumulated dust on ventilation openings, and also remove dust regularly from the inside of the
device. The last operation must be performed by adequately trained and authorized personnel, and
with the device turned off.
Install the computer that generates the alarm sounds in such a way that the sound can be heard
adequately in the appropriate areas. The speaker is installed on the front panel of the computer.
The hardware watchdog device is connected to the computer with a USB cable and has its own
power supply. Mount it in such a way that the sound can be heard adequately in the appropriate
areas. Test regularly by temporarily removing the USB plug while the central station power is turned
on.
The Surveyor Central must be connected to a properly grounded power terminal, and the electrical
installation must comply with the local safety requirements for the environment where it is used.
The Surveyor Central requires more than one mains outlet. Fix multi-socket outlets properly, do not
leave them on the floor, and organize the cabling in such a way that normal work is not hampered
and safety is not compromised.
Regularly check all mains power cables for damage and proper connection. Do not use equipment
with a damaged power cord.
Prevent liquids from penetrating inside the equipment, components, and transmitters.
The various manufacturers of accessories provide separate operator manuals (e.g., monitor, laser
printer, X12+, T12, T12S, patient cables, electrodes). Read these manuals well and refer to them for
specific functions. It is recommended to keep all manuals together.
Every hardware or software modification has to be made by authorized and trained technical
personnel.
Technical and service documents are available upon request.
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......