![background image](http://html1.mh-extra.com/html/mortara/surveyor-central-3-x/surveyor-central-3-x_service-manual_1836784028.webp)
Surveyor Central
3-2
System / Network Verification
Node to node connectivity check:
From a Surveyor Central control node, communicate to the other nodes of the networked system by
opening a command prompt and pinging each node’s IP Address per the system network diagram.
This process can also be used for testing communications between the Surveyor Central to S12/S19 Multi
Parameter Monitors. The IP addresses of the S12/S19 must be known to perform this testing, refer to the
antenna network map for the facility or the system networking map.
Note: For this testing it is recommended that all monitoring be suspended.
Export and Archive Function:
Equipment needed:
X12+/T12(S) transmitter, patient cable, patient simulator.
Start a monitoring session on the Surveyor Central using the test transmitter and patient simulator.
Once the system has had enough time to perform and display measurements on the system
display, select 12-Lead+Exp from the Print Option menu.
Verify the system has exported a digital copy of the ECG to either E-Scribe or the defined export
location.
Verify a hard copy was sent to the defined printer.
Stop the monitoring session and select the option indicating that the monitoring session just
stopped and archive the study from the “Patients” tab.
Verify the archived data is present in the specified archive path.
Time Synchronization:
Shutdown all nodes of the Surveyor Central system, except the storage server.
On the storage server, expand the “Guardian” application.
Right click anywhere in the guardian application screen and select
“reboot”.
Once the server is booting up, verify that during the bootstrap process it states “Time
Synchronized”.
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......