Section 6
System Restoration
Disaster Recovery Procedure
1.
Turn the system on and then insert the Recovery DVD into the CDRW/DVD+RW drive. A
message will appear on the screen giving you two options to choose from. Press the letter “
R
” on
the keyboard for the Recovery Process.
2.
After some time, the PC Recovery Wizard will appear. Make sure the option “Recover the PC to
a specific point in time” is selected and then click on
Next
.
3.
Under Description, click on “Initial Recovery Point” and then click on
Next
.
4.
In the Smart PC
Recovery screen, select the option “Recover PC without preserving new and
updated files” and then click on
Next
.
5.
Click on
Yes
to begin the Recovery Process. The drive will first be formatted, and then the
Recovery Point will be copied.
6.
Once the Recovery Process is complete, click on
Restart
and then remove the Recovery DVD
from the drive. The system will then reboot.
7.
Finally, copy the directories and files from the Configuration CD provided upon installation. Run
the executables of the PC that is being recovered.
6-1
6
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......