![background image](http://html1.mh-extra.com/html/mortara/surveyor-central-3-x/surveyor-central-3-x_service-manual_1836784043.webp)
Section 4
4-9
8. Install the replacement board being careful not bend the board (bending the board can cause
damage to components)
9. Replace the cover to the Central Station PC
10. Reconnect all cables to the Central Station PC. Be sure to connect the cables in the same
locations as noted in steps 3 and 4.
11. Power the system up as described in step 14 listed previously
12. Test the system per the Conformance Testing steps in the next section
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......