Surveyor Central
5-6
2500 MHz Antenna Network
Distance between 2 amplifiers:
15 meters (49.2 feet)
Amplifier/Splitter:
Dimensions:
Down converter DC-2500:
Dimensions:
AN-2500+ range 2401 to 2483 MHz
amplification: 10dB
power input: 12V DC max, 310 mA
connector D.5.5mm, central pin + (positive)
13.5 cm x 13.5 cm x 5 cm (5.3 x 5.3 x 2 inches)
325 grams (11.5 oz.)
Output range: 900
– 930 MHz, with 4 input bands.
Channels on bands 1 to 4:
1: 0 to 3F (2.4
– 2.421 GHz)
2: 40 to 7F (2.421
– 2.442 GHz)
3: 80 to BF (2.442
– 2.462 GHz)
4: A0 to FF (2.462
– 2.484 GHz)
Power input: 12 V DC, max; 500 mA
Connector D.5.5mm, central pin + (positive)
13.5 cm x 13.5 cm x 5 cm (5.3” x 5.3” x 2”)
325 grams (11.5 oz.)
Cable:
Low Loss Coaxial Cable:
BELDEN #9310 / Times Microwave LMR200, attenuation:
10dB /15 meters @
2.45 GHz; or
Times Microwave LMR400, attenuation:
10dB /45 meters @ 2.45 GHz
Plenum Rated Coaxial Cable for 2500 MHz networks:
Times Microwave LMR-195-LLPL, attenuation:
10dB /15 meters
Power requirements:
One power supply every 5 amplifiers
Power supply current: 0.6 A
Nominal voltage: 100-240 V
915 MHz Antenna Network (ITU region 2 only)
Distance between 2 amplifiers:
20 meters (66 feet)
Amplifier/Splitter:
Dimensions:
Low Noise Amplifier LNA-915 :
Dimensions:
AN-915 range 904.76 to 925.15 MHz
amplification: 10dB
power input: 12V DC max, 310 mA
connector D.5.5mm, central pin + (positive)
13.5 cm x 13.5 cm x 5 cm (5.3 x 5.3 x 2 inches)
325 grams (11.5 oz.)
Power input: 12 V DC, max; 500 mA
Connector D.5.5mm, central pin + (positive)
13.5 cm x 13.5 cm x 5 cm (5.3” x 5.3” x 2”)
325 grams (11.5 oz.)
Cable:
Plenum Rated Coaxial Cable for 915 MHz networks:
BELDEN #82907,
attenuation:
9.5 dB / 20 meters @ 915 MHz
Power requirements:
One power supply every 5 amplifiers
Power supply current: 0.6 A
Nominal voltage: 100-240 V
Summary of Contents for Surveyor Central 3.x
Page 4: ...iii...
Page 16: ...Surveyor Central 2 2 Note The Telemetry Nodes are computers that contain the PCI RF Boards...
Page 26: ......