Monteris Medical Neuroblate, Instructions For Use Manual

Page: 33 / 158

NeuroBlate® System Instructions for Use
80469 Rev D – Nov 16, 2018
- 33 -
4.7. I
NSPECTION
, C
LEANING
, D
ISINFECTION
, S
TERILIZATION
•
Germicidal wipes are recommended to remove soil from the Interface Platform
Arms and Connector Module. Wipe dry with paper towels. If excessive soiling of
surfaces occurs, paper towels can be used dampened with disinfecting detergent to
clean. Wipe detergent off using tap water dampened paper towels, followed by dry
paper towels.
WARNING : Do Not Sterilize! Protect Device from Fluids!
Do Not Submerge! Do Not Spray to Clean!
•
Prior to Use: Carefully inspect all system laser cable/umbilical connections to ensure
they have all completed the “two-click” connection, i.e., plug is pushed into mating
connector so that one click at partial (half) insertion and a second click at full
insertion.
•
Prior to Use: Carefully inspect the Laser Delivery Probe and Advanced Probe Driver
packages for any breach of sterile barrier or damage to the contents. DO NOT USE if
the sterile barrier integrity is compromised or contents appear damaged; contact
your Monteris Medical representative for replacement items.
•
The Laser Delivery Probe, Advanced Probe Driver and Robotic Probe Driver are for
single use only. Dispose properly after use.
•
Do not reprocess or re-sterilize.
4.8. O
PERATING
C
ONDITIONS
•
Temperature: 15° C (59° F) to 30° C (86° F)
•
Relative Humidity: < 70%
•
The laser is calibrated to deliver up to 12W into the laser delivery probe which then
delivers this energy through two different emission patterns at the tip based on
probe type.
4.9.
S
TORAGE
C
ONDITIONS
•
Temperature: 10° C (50° F) to 40° C (104° F)
•
Relative Humidity: < 60%
•
Keep out of direct sunlight