Monarch NICE7000, User Manual

Page: 201 / 237

NICE7000 User Manual 7 Description of Function Codes
- 199 -
Function Code Parameter Name Setting Range Default Unit Property
FU-32
Nearest landing floor
1–56 0 -
●
FU-33
Destination floor
1–56 0 -
●
These parameters display the nearest floor that the elevator can land and the destination
floor.
Function Code Parameter Name Setting Range Default Unit Property
FU-34 Stop time 0.0–60.0 0 s
●
It displays the time required for this running. "60" is displayed at stop.
Function Code Parameter Name Setting Range Default Unit Property
FU-35 Deceleration distance 0.0–100.0 0 s
●
It displays the deceleration distance from the rated elevator speed to zero speed under the
current setting of deceleration parameters (deceleration speed and time).
Function Code Parameter Name Setting Range Default Unit Property
FU-49 Mod1 communication state 1 0–65535 0 -
●
FU-50 Mod1 communication state2 0–65535 0 -
●
FU-51 Mod1 communication state 3 0–65535 0 -
●
FU-52 Mod1 communication state 4 0–65535 0 -
●
These parameter display the Mod1 communication state between the HCB of all floors and
the MCB.
Each parameter specify different floor addresses:
• State 1: floors 1–16
• State 2: floors 17–32
• State 3: floors 33–48
• State 4: floors 49–56
Figure 7-11 Viewing Mod1 communication state between HCBs and MCB
1 2 3 4 5
Present address
Communication
state of present
address
Address of the
HCB at each floor
Segment ON: communication normal
Segment OFF: communication abnormal
Display
Meaning
1
0
Normal Interrupted