© MOBATIME
7 / 96
800337.22
ETC xx (wall mounting version):
The wall mounting version of the ETC should be mounted with the enclosed DIN rail or
on an existing DIN rail into a closed cabinet. Operate the device only in installed
condition. Access to the device only for skilled persons allowed.
ETC xxR (rack version)
The device is designed for 19" racks and intended to be installed in a 19" cabinet.
Operate the device only in installed condition.
1.4
Observe operating safety!
Never open the housing of the device! This could cause an electric short or even a fire,
which would damage your device. Do not modify your device!
When the device is powered on, it never must be opened or accessed by the hands or
any objects through existing openings at the device.
The device is not intended for use by persons (including children) with limited physical,
sensory, or mental capacities or a lack of experience and/or knowledge.
Keep packaging such as plastic films away from children. There is the risk of
suffocation if misused.
1.5
Consider the installation site!
To avoid any operating problems, keep the device away from moisture and avoid dust,
heat, and direct sunlight. Do not use the device outdoors.
By operating the device, the heat sinks attached to the sides get warm.
Make sure there is enough air circulation for the heat to dissipate.
The device shuts off when overheated. After it has regained its normal operating
temperature, it will restart automatically. The settings are saved.
Danger! Make sure
that you wait before using the device after any transport until the device has
reached the ambient air temperature. Great fluctuations in temperature or
humidity may lead to moisture within the device caused by condensation, which
can cause a short.
1.6
Please observe the electromagnetic compatibility!
This device complies with the requirements of the EMC and the Low-voltage Directive.
!
Caution!
!
Caution!
!
Caution!
