© MOBATIME
47 / 96
800337.22
CAN Communication
If the CAN communication function is selected, the ETC is synchronized from the CAN
module of a Master Time Center MTC and is working as a sub-master clock. Error
messages are transmitted to the MTC. The text "CAN" appears in the display.
Notice:
For the CAN communication a CAN-M/S network interface has to be
connected to the serial interface RS 232. The communication parameters
may not be changed manually and they have to be 19200/8/none/1.
Remote Download
In menu "File manager" it is possible to activate the function "Remote download". This
allows you to have a permanent link between the ETC and a remote computer and thus
to start downloading files (season tables, switch programs, system software) at any time.
The text "Remote dld." appears in the display. This function is only available for the RS
232 interface COM 1.
If the mode of an interface has been changed, the corresponding standard communica-
tion parameters will be set automatically (Exception: telegram output). Nevertheless it is
possible to change the communication parameters for each interface manually in the
interface’s configuration menu (refer to chapter 13.2.4).
Baudrate:
Data Bits:
Stop Bits:
Parity:
CAS Comm.
1)
19200
8
1
None
CAN Comm.
19200
8
1
None
Remote Dld.
19200
8
1
None
1)
In menu "Synchronisation" it is possible to activate a function for automatic baudrate
detection while CAS communication is running (chapters 10.3).
The communication parameters in mode "Synchronisation" depend on the selected time
source but will be set automatically, too.
Baudrate:
Data Bits:
Stop Bits:
Parity:
GPS TSIP
9600
8
1
Odd
GPS NMEA
4800
8
1
None
IF 482
9600
7
1
Even
13.2.3 Time
Zone
Setting of the time zone.
...
Port COM X [RSXXX]
Configuration
Time zone: 00
The cursor keys
/
are used for selection from the 100 possible entries, or the
time zone can be selected by means of a numerical input.
