© MOBATIME
50 / 96
800337.22
14 Relays
The different ETC models contain up to 4 relays with switching contacts. The relays can each
be allocated to one of the 64 switch program channels independently from the other relays.
Manual operation of the relays is possible through the channel monitor (chapter 15.5). Technical
data of the contacts can be found in annexe H.
The illustrated contact position correspond to the idle position (OFF).
14.1 Switching
States
The states of all 4 relays are assembled on one display.
MENU
Relays
14.2 Channel Assignment
The assignment of the switch program channels to the relays can be defined on choice.
...
CONFIG.
Relay
1
=>Channel:
Relay
2
=>Channel:
Relay
3
=>Channel:
Relay
4
=>Channel:
Input range:
01 – 64
, corresponds to the channel number of the switch program
00
, relay not assigned (state remains unchanged)
Relays
ETC 12 (R)
2
ETC 14 (R)
4
ETC 24 (R)
4
R e l 1 = O F F R e l 3 = O F F
R e l 2 = O F F R e l 4 = O F F
0 8 : 4 8 : 0 1 0 5 . 1 1 . 0 2
B A C K C O N F I G .
OFF
ON
