Mitsubishi MELSEC QJ71C24, User Manual

Page: 211 / 442

8 - 6 8 - 6
MELSEC-Q
8 DATA COMMUNICATION USING THE PRE-DEFINED PROTOCOL
8.1.3 Pre-defined protocol monitoring/test
In the "Pre-defined protocol monitor/test" window of GX Configurator-SC (Intelligent
function module utility), the pre-defined protocol execution status and an error code
can be confirmed.
[Confirmation procedure]
1) Display the "Pre-defined protocol monitor/test" window.
For information on how to display this window, refer to Section 9.6.7.
2) The current value of each item can be confirmed.
[Monitor/test window]
[Pre-defined protocol monitor/test items]
Item Description Reference
X1D: Pre-defined protocol ready The ON/OFF status of X1D can be confirmed. Section 8.1.5
Protocol cancellation
The cancel status of the pre-defined protocol can be
confirmed.
Operating Manual
(Pre-defined protocol
support function)
Execution status The protocol execution status can be confirmed. Section 8.1.4
Pre-defined protocol function error
code An error code for the pre-defined protocol function can be
confirmed.
Section 11.2.1
Execution log options
Condition for registering protocol execution logs can be
confirmed and specified.
The specification will take effect when the dedicated
instruction (CPRTCL) is executed.
Error logs Failed protocol execution logs are stored.
All logs All protocol execution logs are stored.
Section 8.1.4
Operating Manual
(Pre-defined protocol
support function)
Number of protocol executions The number of protocol executions can be confirmed. Section 3.9