Mitsubishi MELSEC iQ-F, User Manual

Page: 165 / 182

APPX
Appendix 4 Buffer Memory Areas
163
A
CH1 Logging data setting
Determine the target to be collected: digital output value or digital operation value.
For details on the logging function, refer to the following.

Page 59 Logging Function
Setting a value other than the above causes a logging data setting range error (error code: 1D3  H).
When 'CH1 Logging enable/disable setting' (Un\G535) is set to Disable (1), the setting for 'CH1 Logging data setting'
(Un\G536) is ignored.
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■ Default value
The default value is Digital operation value (1).
CH1 Logging cycle setting value
Set a cycle for storing the logging data.
For details on the logging function, refer to the following.

Page 59 Logging Function
■ Buffer memory address
The following shows the buffer memory address of this area.
■
Setting range
The setting range varies depending on the setting in 'CH1 Logging cycle unit setting' (Un\G538) and 'CH1 Input type/range
setting' (Un\G598).
• Setting a value out of the above range causes a logging cycle setting value range error (error code: 1D1

H). Logging
cannot be performed.
• If the set logging cycle is below the update cycle of data to be logged, a logging cycle setting disable error (error code:
1D2

H) occurs. Logging cannot be performed.
■ Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is set to 1.
Setting value Setting content
0 Digital output value
1 Digital operation value
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Logging data setting 536 736 936 1136 1336 1536 1736 1936
CH  Logging data setting (in FX2N allocation mode function) 9171 9172 9173 9174 9175 9176 9177 9178
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Logging cycle setting value 537 737 937 1137 1337 1537 1737 1937
CH

Logging cycle setting value (In FX2N allocation mode
function)
9181 9182 9183 9184 9185 9186 9187 9188
CH1 Logging cycle unit setting (Un\G538) CH1 Input type/range setting (Un\G598) Setting range
ms (1) Current/Voltage 1 to 32767
Resistance temperature detector/thermocouple 40 to 32767
s (2) 1 to 3600